Hello, welcome to Huaxin
Permanent Magnet Motor Series

Mining Explosion-proof Permanent Magnet Synchronous Variable Frequency Motor

Mining Explosion-proof Low Frequency Permanent Magnet Three-coiling Synchronous Motor

The rated capacity of the Explosion-Proof Variable-Frequency Permanent Magnet Synchronous Motor (The TBVF Series) and the Explosion-proof Low Frequency Permanent Magnet Three-phase Synchronous Motor (The TBD Series) is 55 to 630kW. Compared with the traditional electrically excited motors, the rotor of the motor has a permanent magnet structure (Hereinafter referred to the “Permanent Magnet Motor”), the slip ring and brush gear can be saved. The advantages of the permanent magnet motor include but are not limited to: simple structure, reliable operation, small size, low consumption, high efficiency. The permanent magnet motor adopts the VFD to control synchronous start, which can reduce impact on the electricity grid network, and balance power while operating multiple machines. 

Huaxin company is the first manufacturer who develops, obtains patents, and produces explosion-proof permanent magnet motors in China. This series of products have already been sold in many coal companies in Shanxi, Shandong, Gansu, Heilongjiang, Inner Mongolia and other provinces in China.


  • Specification and Type

    Rated

    Power (kW)

    Rated Voltage (V)

    Rated Current (A)

    Rated Torque (N.m)

    Rated Rotating 

    speed (r/min)

    Rated 

    Frequency 

    (Hz)

    Efficiency (%)

    Power 

    Factor

    TBVF-55/24YC(660)

    55

    660

    53

    6734

    78

    15.6

    93

    0.92

    TBVF-55/24YC(1140)

    55

    1140

    37

    6734

    78

    15.6

    93

    0.92

    TBVF-75/24YC(660)

    75

    660

    105

    9182

    78

    15.6

    93

    0.92

    TBVF-75/24YC(1140)

    75

    1140

    54

    9182

    78

    15.6

    93

    0.92

    TBVF-110/32YC(660)

    110

    660

    135

    13468

    78

    20.8

    93

    0.92

    TBVF-110/32YC(1140)

    110

    1140

    74

    13468

    78

    20.8

    93

    0.92

    TBVF-132/32YC(660)

    132

    660

    155

    16162

    78

    20.8

    93

    0.92

    TBVF-132/32YC(1140)

    132

    1140

    86

    16162

    78

    20.8

    93

    0.92

    TBD-560S-32Y(660)

    160

    660

    186

    19590

    78

    20.8

    93

    0.92

    TBD-560S1-32Y(1140)

    160

    1140

    115

    19590

    78

    20.8

    93

    0.92

    TBVF-200/32YC(660)

    200

    660

    205

    23151

    82.5

    22

    93

    0.92

    TBVF-250/32YC(660)

    250

    660

    255

    28939

    82.5

    22

    93

    0.92

    TBD-560L1-32Y(1140)

    250

    1140

    184

    28939

    82.5

    22

    93

    0.92

    TBD-630S-32Y(1140)

    315

    1140

    186

    37370

    80.5

    21.5

    93

    0.92

    TBD-630M-32Y(1140)

    355

    1140

    205

    42115

    80.5

    21.5

    93

    0.92

    TBD-630L-32Y(1140)

    400

    1140

    224 

    47453

    80.5

    21.5

    93

    0.92

    TBVF-400/40YC(1140)

    400

    1140

    270

    44418

    86

    28.7

    93

    0.92

    TBVF-450/40YC(1140)

    450

    1140

    287

    49971

    86

    28.7

    93

    0.92

    TBVF-500/40YC(1140)

    500

    1140

    305

    55523

    86

    28.7

    93

    0.92

    TBVF-560/40YC(1140)

    560

    1140

    378

    62186

    86

    28.7

    93

    0.92

    TBVF-630/40YC(1140)

    630

    1140

    387

    69959

    86

    28.7

    93

    0.92

    Specification and Type

    Range of Speed Regulation (r/min)

    Number of Poles

    Protection Level

    Explosion-

    Proof Label

    Insulation 

    Class

    Cooling 

    Mode

    Working 

    System

    Total 

    Weight (kg)

    TBVF-55/24YC(660)

    0~78

    24

    IP55

    EXDI

    H

    IC46W

    S1

    1320

    TBVF-55/24YC(1140)

    0~78

    24

    IP55

    EXDI

    H

    IC46W

    S1

    1320

    TBVF-75/24YC(660)

    0~78

    24

    IP55

    EXDI

    H

    IC46W

    S1

    1950

    TBVF-75/24YC(1140)

    0~78

    24

    IP55

    EXDI

    H

    IC46W

    S1

    1950

    TBVF-110/32YC(660)

    0~78

    24

    IP55

    EXDI

    H

    IC46W

    S1

    2400

    TBVF-110/32YC(1140)

    0~78

    24

    IP55

    EXDI

    H

    IC46W

    S1

    2400

    TBVF-132/32YC(660)

    0~78

    24

    IP55

    EXDI

    H

    IC46W

    S1

    2700

    TBVF-132/32YC(1140)

    0~78

    24

    IP55

    EXDI

    H

    IC46W

    S1

    2700

    TBD-560S-32Y(660)

    0~78

    32

    IP55

    EXDI

    H

    IC46W

    S1

    3400

    TBD-560S1-32Y(1140)

    0~78

    32

    IP55

    EXDI

    H

    IC46W

    S1

    3400

    TBVF-200/32YC(660)

    0~82.5

    32

    IP55

    EXDI

    H

    IC46W

    S1

    3600 

    TBVF-250/32YC(660)

    0~82.5

    32

    IP55

    EXDI

    H

    IC46W

    S1

    4100 

    TBD-560L1-32Y(1140)

    0~82.5

    32

    IP55

    EXDI

    H

    IC46W

    S1

    4100

    TBD-630S-32Y(1140)

    0~80.5

    32

    IP55

    EXDI

    H

    IC46W

    S1

    6140

    TBD-630M-32Y(1140)

    0~80.5

    32

    IP55

    EXDI

    H

    IC46W

    S1

    6300 

    TBD-630L-32Y(1140)

    0~80.5

    32

    IP55

    EXDI

    H

    IC46W

    S1

    6900

    TBVF-400/40YC(1140)

    0~86

    40

    IP55

    EXDI

    H

    IC46W

    S1

    6900

    TBVF-450/40YC(1140)

    0~86

    40

    IP55

    EXDI

    H

    IC46W

    S1

    7400

    TBVF-500/40YC(1140)

    0~86

    40

    IP55

    EXDI

    H

    IC46W

    S1

    8000

    TBVF-560/40YC(1140)

    0~86

    40

    IP55

    EXDI

    H

    IC46W

    S1

    8900

    TBVF-630/40YC(1140)

    0~86

    40

    IP55

    EXDI

    H

    IC46W

    S1

    9900

  • Compared with the traditional AC Asynchronous Motor, the Permanent Magnet Motor has the following advantages:

    1.High Efficiency. It can be indicated from four aspects:

    (1) The magnetic field of the Permanent Magnet Synchronous Motor is generated by the permanent magnet, so as to avoid loss of excitation caused by magnetic field generated from the excitation current (copper loss); 

    (2) Compared with the external characteristic efficiency curve of the Asynchronous Motor, the Permanent Magnet Synchronous Motor has higher efficiency value at light load, which is the greatest advantage of the Permanent Magnet Synchronous Motor than the Asynchronous Motor in the aspect of energy saving. The motor rarely operates at full load when driving load, and the reasons are: on the one hand, the user determines the motor power according to the limit conditions of the load during motor selection. However, the opportunity of limit condition is rare. Meanwhile, in order to prevent motor burns at the abnormal condition, the user will also further reserve the allowance for the motor; on the other hand, when the designer designs the motor, in order to guarantee the motor reliability, a certain power allowance will be further reserved based on the power required by the user. It causes that over 90% motors in actual operation work below 70% of the rated power, especially when driving fans or pumps, which causes that the motors usually work in the light load area. The Induction Motors have low efficiency at light load. However, higher efficiency of the Permanent Magnet Synchronous Motors can still be maintained in the light load area, and the efficiency is higher than that of the Asynchronous Motors by over 20%.

    (3) Based on the reason given in the Article 2 above, the power factor of the Permanent Magnet Synchronous Motor is high. Therefore, compared with Asynchronous Motor, the motor current of the Synchronous Motor is lower, the copper loss of the motor’s stator is lower correspondingly, and the efficiency is higher.

    (4) High system efficiency: the Permanent Magnet Motor's parameters, especially the power factor, are not influenced by the number of motor poles. Therefore, it is convenient to be designed as multi-pole motor (such as over 100 poles). In the traditional way, the load motor should be driven by the Speed Reducer. However, it can be made into a direct drive system that is driven by the Permanent Magnet Synchronous Motor so as to save the Speed Reducer, and improve the transmission efficiency. 

    2. High Power Factor

    The power factor is adjustable during the designing of the Permanent Magnet Synchronous Motor. The power factor can be designed as 1, and it is unrelated with the number of motor poles. However, due to the excitation features of the Asynchronous Motor, the power factor will be lower and decrease with increasing the number of poles. For example, the power factor of 8-pole motor is usually 0.85. The larger the number of poles is, the lower the corresponding power factor is. Even if 2-pole motor with the maximum power factor, it is difficult for the power factor to reach 0.95. If the motor power factor is high, there are the following advantages:

    (1) If the power factor is high, the motor current is low, so as to reduce the copper loss of the motor stator, and more energy is saved;

    (2) If the power factor is high, the capacity of the supporting devices of the motor, such as the inverter, transformer, etc, can be lowered. Meanwhile, the specifications of other auxiliary facilities, such as the switch, cable, etc. can be smaller, and the corresponding system cost is lower. 

    (3) The power factor of the Permanent Magnet Synchronous Motor is not restricted by the number of motor poles. If the motor supporting system permits, the number of motor poles can be designed higher, the corresponding motor volume can be smaller, and the direct material cost of the motor is lower. 

    3. Simple and Flexible Motor Structure

    (1) The conducting bar, end ring and rotor windings shall be installed on the Asynchronous Motor, which greatly restricts the flexibility of the Asynchronous Motor's structure.

    (2) The parameters of the Permanent Magnet Synchronous Variable Frequency Speed Control Motor are not restricted by the number of motor poles, so the motor can directly drive the load. The Speed Reducer which has large noise and high failure rate can be eliminated, and the flexibility in mechanical transmission system design can be increased.

    (3) Without the restriction by the number of poles, the Permanent Magnet Synchronous Variable Frequency Speed Control Motor can be designed as the multi-pole motor. The number of motor poles is close or equal to the number of slots of the motor, i.e., realizing that the motor pitch (i.e., coil span) is close or equal to 1. Centralized winding can be realized, which can greatly shorten the length of the ends of the 'invalid part' of the motor stator windings, so as to greatly shorten the machine length, and reduce the motor volume. Especially on the occasion with higher requirements for the axial length of the motor, by utilizing the feature of multi-pole centralized winding of the permanent magnet synchronous motor, the motor can be designed as the disc structure, which fully reflects the advantages of the permanent magnet synchronous motor. On the other hand, the winding ends are greatly reduced, and the copper loss caused by motor winding ends is reduced correspondingly, which further improves motor efficiency. 

    4. High Reliability

    Comparing between the two motors themselves, the reliability of the Permanent Magnet Synchronous Variable Frequency Speed Control Motor is equivalent to that of the Asynchronous Motor. However, due to the flexibility of the Permanent Magnet Synchronous Motor's structure, it is convenient for directly loading the drive and eliminating the Speed Reducer with low reliability, thus greatly improves the reliability of the transmission system. 

    5. Small Volume and Large Power Density 


  • 55kW and 75kW Motor Installation Drawing

    110kW, 132kW, 160kW Motor Installation Drawing

    200kW, 250kW Motor Installation Drawing

    315kW, 355kW, 400kW Motor Installation Drawing

    400kW, 450kW, 500kW, 560kW, 630kW Motor Installation Drawing

  • Table of Selection of Permanent Magnet Motor of Shanxi Huaxin Electric Co., Ltd.

    Specification and Type

    Rated

    Power (kW)

    Rated Rotating Speed (r/min)
     

    Rated 

    Torque (N.m)

    Motor Output Power Corresponding to Different Working Speeds (kW)

    >50-55 r/min

    >55-65 r/min

    >65-75 r/min

    >75-85 r/min

    >85-95 r/min

    >95-105 r/min

    TBVF-55/24YC(660)

    55

    78

    6734

    39

    46

    53

    55

    67

    74

    TBVF-55/24YC(1140)

    55

    78

    6734

    39

    46

    53

    55

    67

    74

    TBVF-75/24YC(660)

    75

    78

    9182

    53

    63

    72

    75

    91

    101

    TBVF-75/24YC(1140)

    75

    78

    9182

    53

    63

    72

    75

    91

    101

    TBVF-110/32YC(660)

    110

    78

    13468

    78

    92

    106

    110

    134

    148

    TBVF-110/32YC(1140)

    110

    78

    13468

    78

    92

    106

    110

    134

    148

    TBVF-132/32YC(660)

    132

    78

    16162

    93

    110

    127

    132

    161

    178

    TBVF-132/32YC(1140)

    132

    78

    16162

    93

    110

    127

    132

    161

    178

    TBD-560S-32Y(660)

    160

    78

    19590

    113

    133

    154

    160

    195

    215

    TBD-560S1-32Y(1140)

    160

    78

    19590

    113

    133

    154

    160

    195

    215

    TBVF-200/32YC(660)

    200

    82.5

    23151

    133

    158

    182

    200

    230

    255

    TBVF-250/32YC(660)

    250

    82.5

    28939

    133

    158

    182

    200

    230

    255

    TBD-560L1-32Y(1140)

    250

    82.5

    28939

    133

    158

    182

    200

    230

    255

    TBD-630S-32Y(1140)

    315

    80.5

    37370

    215

    254

    293

    315

    372

    411

    TBD-630M-32Y(1140)

    355

    80.5

    42115

    243

    287

    331

    355

    419

    463

    TBD-630L-32Y(1140)

    400

    80.5

    47453

    273

    323

    373

    400

    472

    522

    TBVF-400/40YC(1140)

    400

    86

    44418

    256

    302

    349

    395

    400

    488

    TBVF-450/40YC(1140)

    450

    86

    49971

    288

    340

    392

    445

    450

    549

    TBVF-500/40YC(1140)

    500

    86

    55523

    320

    378

    436

    494

    500

    610

    TBVF-560/40YC(1140)

    560

    86

    62186

    358

    423

    488

    553

    560

    684

    TBVF-630/40YC(1140)

    630

    86

    69959

    403

    476

    549

    623

    630

    769

  • The TBVF Series Explosion-Proof Variable-Frequency Permanent Magnet Synchronous Motor and the TBD Series Explosion-proof Low Frequency Permanent Magnet Three-phase Synchronous motor are taken as the power input mechanism, supported by the VFD to form the Permanent Magnet Direct Drive System, which directly drives the belt conveyor.

    The TBVF series and TBD series Permanent Magnet Motors can also be taken as the power input mechanism in the mine, petroleum, building materials and other industries.

  • 1. The altitude shall not exceed 1,000m, and it shall be derated for use when exceeding 1,000m;

    2. Environmental Temperature: The maximum air temperature changes with the seasons, but shall not be more than 40 ℃(104ºF); The lowest air temperature 0 ℃(32ºF);

    3. The cooling Water: the cooling water inlet temperature should be not more than + 25 ℃(+77ºF), also shall not be lower than + 5 ℃(+41ºF). The pressure of cooling water shall be no less than 0.3MPa, no more than 1 MPa, and the flow rate should be no less than 2.8t/h;

    4. The maximum relative humidity shall not be more than 95% (25ºC/77ºF)

    5. In mines with methanol gas mixture and coal dust and there is explosion danger;

    6. The harmonic voltage factor of the power supply shall not exceed 0.02.

Available documents
  • All document kinds >
  • Product brochure
  • Data sheet
  • Software
  • Technical publications
  • Article
  • Material specification
  • Product brochure

Contact information

Submit your inquiry
Name:
Your message:
Phone:
E-Mail:
Company:
Name:
Country:
   

Your local Huaxin Sales Team

  • NameKai Wang
  • Address813 46th Street East, Saskatoon, Saskatchewan S7K 0X1, Canada
  • PhoneChina:15234310529,Canada:+1 (306) 713-2408
  • FaxChina:+86 (0)353-4909788
Close
Submit your inquiry
Name:
Your message:
Phone:
E-Mail:
Company:
Name:
Country:
   

Your local Huaxin Service Team

  • NameKai Wang
  • Address 813 46th Street East, Saskatoon, Saskatchewan S7K 0X1, Canada
  • PhoneChina:15234310529,Canada:+1 (306) 713-2408
  • FaxChina:+86 (0)353-4909788
Close
Submit your inquiry
Name:
Your message:
Phone:
E-Mail:
Company:
Name:
Country:
   

Your local Huaxin Cooperation Team

  • NameKai Wang
  • Address813 46th Street East, Saskatoon, Saskatchewan S7K 0X1, Canada
  • PhoneChina:15234310529, Canada:+1 (306) 713-2408
  • FaxChina:+86 (0)353-4909788
Close

©1996-2017 晋ICP备07500050号 Huaxin Copyright 

©2016-2017 晋ICP备07500050号 Huaxin Copyright