米兰网页版-米兰(中国)-米兰(中国)

Hello, welcome to Huaxin

中文

SCB10 cast resin transformer

The cast resin transformer refers to power transformer of which winding is enveloped with solid insulation. The epoxy resin is taken as the insulation materials for the epoxy resin dry transformer. The high- and low-voltage winding is wounded with the copper strip (foil), and epoxy resin is cast in vacuum for curing, constituting the high-strength fiber reinforced plastics structure. The insulation class includes Class F and Class H. The epoxy resin dry transformer has the features of good electrical performance, strong resistance to lightning shock, strong anti-short circuit ability, small volume, light weight and so on. The temperature display controller can be installed, and the operating temperature of the transformer winding is displayed and controlled, so as to guarantee normal service life of the transformer.

Technical parameters
Product advantage
External dimensions of the product
Features

Model description：

Technical parameters：

1. Rated capacity: 100-2500kVA

2. Rated voltage: primary voltage of 10kV and 6KV

Secondary voltage 0.4kV and others

3. Rated frequency: 50Hz

4. Number of phases: 3 phases

5. Cooling mode: AN/AF

6. Temperature resistance level of the insulation materials: Level F

7. For technical performance data and insulation level, see Table 1 and 2

Table 1 Performance parameters of dry transformer with primary rated voltage of 6kV, 10kV

Rated capacity (kVA)	Voltage combination			Connection unit symbol	Loss		Impedance voltage (％)	No-load current (％)
Rated capacity (kVA)	Primary voltage kV	Primary voltage tapping range %	Secondary voltage kV	Connection unit symbol	No load W	Load W	Impedance voltage (％)	No-load current (％)
100	6 10	±2×2.5 ±5	0.4	Dyn11 Yyn0	400	1570	4	1.8	1.5
125					470	1850		1.6	1.3
160					540	2130		1.6	1.3
200					620	2530		1.4	1.1
250					720	2760		1.4	1.1
315					880	3470		1.2	1
400					980	3990			1
500					1160	4880			1
630					1300	5960	6	1	0.85
800					1520	6960			0.85
1000					1770	8130			0.85
1250					2090	9690			0.85
1600					2450	11700			0.85
2000					3050	14400		0.8	0.7
2500					3600	17100		0.8	0.7

Table 2 Insulation level

Rated voltage (kV)	Rated short-term power frequency withstand voltage (kV)
≤1	3
3	10
6	20
10	35
15	38
20	50
35	70

1. Oil-free, pollution-free, flame retardant and fireproof.

2. Low loss, high efficiency and low noise.

3. Small partial discharge capacity (generally below 10PC), high reliability. It can guarantee long-term safe operation, and the life can be up to 30 years.

4. It can resist crack and temperature change, and has high mechanical strength and strong resistance to short circuit capability.

5. The moisture-proof performance is good, it can be in normal operation at the humidity of 100%, and it can be put into operation without drying after stoppage.

6. The independent transformer chamber is not required, it is not required to lift the core for maintenance, and the load bearing beam is not required, which saves floor area for civil engineering; it is oil free, will not generate toxic gas, and will not pollute the environment. The oil sump and other auxiliary buildings are not required, and the construction cost of construction cost is reduced.

7. Installation is convenient without commissioning, and maintenance is almost not required; it is not required to replace and check oil seal, and the operation and maintenance cost is low.

Capacity	L × W × H (mm)	Total weight (kg)
100	1080×740×950	520
200	1090×760×1160	930
315	1200×850×1180	1250
400	1410×900×1373	1460
500	1280×830×1470	1740
630	1550×850×1270	1780
800	1320×920×1350	2020
1000	1500×960×1395	2380
1250	1600×1000×1560	3310
1600	1600×1210×1700	3230
2000	1670×1150×1680	4250
2500	1670×1210×1820	4670

It is safe, flame-resisting, fireproof and free of pollution, and can be directly installed at the load center. It is maintenance-free, installation is simple and convenient, and the comprehensive operating cost is low. The moisture-proof performance is good, it can be in normal operation at the humidity of 100%, and it can be put into operation without pre-drying after stoppage. The loss is low, the partial discharge is low, the noise is small, the heat-sinking capability is strong, and it can operate at 150% rated load at the forced air cooling conditions.

It is equipped with the perfect temperature protection control system, which provides reliable guarantee for safe operation. High reliability. Through research on operation of the product put into operation, the product reliability indicators have reached the international advanced level.

1. Oil-free, pollution-free, flame retardant and fireproof.

2. Low loss, high efficiency and low noise.

3. Small partial discharge capacity (generally below 10PC), high reliability. It can guarantee long-term safe operation, and the life can be up to 30 years.

4. It can resist crack and temperature change, and has high mechanical strength and strong resistance to short circuit capability.

5. The moisture-proof performance is good, it can be in normal operation at the humidity of 100%, and it can be put into operation without drying after stoppage.

6. The independent transformer chamber is not required, it is not required to lift the core for maintenance, and the load bearing beam is not required, which saves floor area for civil engineering; It is oil free, will not generate toxic gas, and will not pollute the environment. The oil sump and other auxiliary buildings are not required, and the construction cost of construction cost is reduced.

7. Installation is convenient without commissioning, and maintenance is almost not required; it is not required to replace and check oil seal, and the operation and maintenance cost is low.